€16.99 Excl. VAT
per linear metre
- Defender® Extreme Seagull Spike has the widest coverage of all the Defender® Seagull Control products.
- If seagulls are roosting or nesting on deep ledges or parapet walls with a depth of up to 30 cm or 11 inches, this gull deterrent is the one to use.
- The 304 Grade stainless steel pins fan out in an aggressive complex pattern which coupled with the extra-long pins make the Extreme Gull perfectly designed to stop the most determined large seagull
- The Extreme is ideal for use behind the chimney stack, where installing rows of close-together strips works well, creating an impenetrable mat.
Other facts:
- Discounts for quantities (see below)
- You can return unused spikes to us for full refund
- Made from UV stabilized polycarbonate base with 304 grade stainless steel wires
- Each strip is 330mm long (i.e. 3 per metre) and the spikes are 112mm high
- Free delivery over €150 (excluding VAT)
- We do not stock this at present so please allow 10-14 days for delivery
If you will be using an adhesive to fix these spikes, we recommend our Defender Adhesive which has been specifically designed for use with this product
Click for more details
If you are unsure of which product is best for you, either contact us or visit our Product Selector page for advice
Special note: see tab below
Order number of metres below
Description
EXTREME STAINLESS STEEL GULL SPIKES
Suitable For: Seagulls and pigeons
Ledge Protection: Up to 300 mm (11.8 inches)
Strip Length: 333 mm (Just over 13 inches)
Base Width at Widest Point: 80 mm (3.1 inches)
Pin Height: 150 mm (5.9 inches)
Outer Pin to Outer Pin Width: 270 mm (10.6 inches)
Base Made From: UV Stabilised Polycarbonate
Pins Made From: 304 Grade stainless steel wire
Warranty: 25 Year “No-Rust”
Strip Length
The Defender® Extra Wide Stainless Steel Bird Prevention Spike is 33.4 cm or 13 inches long. To cover a 1 metre length ledge or roosting site you will need 3 strips. The angled stainless steel pins protruding from the polycarbonate plastic base will prevent birds and pigeons from attempting to land on any ledge or roosting site
Snappable Sections
Along the underside of the base of Defender® Spikes are 4 grooves, which can be snapped by hand to create 5 shorter lengths, each measuring 6.5 cm and each having the correct angled span of pin protection. This means smaller ledges and uneven surfaces can be securely protected from persistent birds.
Humane Treatment of Birds
All Defender™ Bird Prevention Spike products have been approved by the RSPB as the most humane way of preventing birds from being able to land without injury or harm. The stainless steel pins stop the birds from being able to land, roost or nest. As the spikes make it uncomfortable for birds, they move on safely, without injury, to a new nesting site.
Specification
Gutter Protection: Any standard half round or square guttering.
Strip Length: 333 mm (Just over 13 inches)
Base Width at Widest Point: 15 mm (0.5 inch)
Pin Height: 62 mm (2.4 inches)
Clip Height: 44 mm (1.7 inches)
Total Height inc. Clip: 91 mm (3.6 inches)
Outer Pin to Outer Pin Width: 97 mm (3.8 inches)
Made from: UV Stabilised Polycarbonate
Warranty: UK 15 Year
Pricing & Delivery
- Quantity discounts as follows:
Discounts apply on total metres per order on all standard plastic & steel spikes. Adjusted automatically in cart.
- There is a standard carriage charge of €9.99 plus VAT per order that will be applied at checkout. FREE DELIVERY on orders over €150 (not including VAT)
Free Sample
We are quite happy to send you a free sample of any products you want to look at before ordering.
(It will not be a full length but probably about 1/3rd of normal but will enable you to assess it.)
All we ask is that you initially cover the cost of carriage at €6.99 BUT if you order later we will refund that against your purchase.
To order, please click on the button below which will take you to a page where you can make your selection.
